Advanced - NETGEAR GSM7212P User Manual

ARP Cache
Use this screen to show ARP entries in the ARP Cache.
To display the ARP Cache page, click Routing
Use Port to select the associated Unit/Slot/Port of the connection
1.
IP Address displays the IP address. It must be the IP address of a device on a subnet
2.
attached to one of the switch's existing routing interfaces.
MAC Address displays the unicast MAC address of the device. The address is six two-digit
3.
hexadecimal numbers separated by colons, for example 00:06:29:32:81:40.
Click REFRESH to show the latest IP information.
4.

Advanced

.From the Advanced link, you can access the following pages:
• Static ARP Cache
• ARP Table Configuration
Static ARP Cache
To display the Static ARP Cache page, click Routing
Web Management User Guide
on page 190
on page 192
190
  
ARP Basic ARP Cache.
 
ARP Advanced

ARP Create.