NETGEAR GSM7212P User Manual page 290

on page 291
• MAC Rules
• MAC Binding Configuration
• MAC Binding Table
MAC ACL
A MAC ACL consists of a set of rules which are matched sequentially against a packet. When
a packet meets the match criteria of a rule, the specified rule action (Permit/Deny) is taken
and the additional rules are not checked for a match. On this menu the interfaces to which an
MAC ACL applies must be specified, as well as whether it applies to inbound or outbound
traffic. Rules for the MAC ACL are specified/created using the MAC ACL Rule Configuration
menu.
There are multiple steps involved in defining a MAC ACL and applying it to the switch:
Use the
1. MAC ACL
Use the
2. MAC Rules
Use the
3. MAC Binding Configuration
Optionally, use the
4.
To display the MAC ACL page, click Security
The MAC ACL table displays the number of ACLs currently configured in the switch and the
maximum number of ACLs that can be configured. The current size is equal to the number of
configured IPv4 ACLs plus the number of configured MAC ACLs.
To configure a MAC ACL:
To add a MAC ACL, specify a name for the MAC ACL in the Name field, and click ADD.
1.
The name string may include alphabetic, numeric, dash, underscore, or space
characters only. The name must start with an alphabetic character.
Each configured ACL displays the following information:
Rules - Displays the number of rules currently configured for the MAC ACL.
•
Web Management User Guide
on page 292
on page 293
page to create the ACL ID.
page to create rules for the ACL.
page to assign the ACL by its ID number to a port.
page to view the configurations.
MAC Binding Table
290

ACL > Basic > MAC ACL.