NETGEAR GSM7212P User Manual page 137

IGMP Snooping Querier Configuration
Use this menu to configure the parameters for IGMP Snooping Querier. Note that only a user
with Read/Write access privileges may change the data on this screen.
To access this page, click Switching
To configure IGMP Snooping Querier settings:
Use Querier Admin Mode to select the administrative mode for IGMP Snooping for the
1.
switch. The default is disable.
Use Querier IP Address to specify the Snooping Querier Address to be used as source
2.
address in periodic IGMP queries. This address is used when no address is configured on
the VLAN on which query is being sent.
Use IGMP Version to specify the IGMP protocol version used in periodic IGMP queries.
3.
IGMP queries.
Use Query Interval(secs) to specify the time interval in seconds between periodic queries
4.
sent by the snooping querier. The Query Interval must be a value in the range of 1 and
1800. The default value is 60.
Use Querier Expiry Interval(secs) to specify the time interval in seconds after which the
5.
last querier information is removed. The Querier Expiry Interval must be a value in the range
of 60 and 300. The default value is 60.
Field
VLAN Ids Enabled For IGMP Snooping Querier
Web Management User Guide
 
Multicast IGMP Snooping
Description
Displays VLAN Ids enabled for IGMP snooping
querier.
137

Querier Configuration.