Use the dropdown menu to select the method, if any, that should appear second in the
3.
selected authentication login list. This is the method that will be used if the first method times
out. If you select a method that does not time out as the second method, the third method
will not be tried. Note that this parameter will not appear when you first create a new login
list.
Use the dropdown menu to select the method, if any, that should appear third in the selected
4.
authentication login list.
Click ADD to add a new login list to the switch.
5.
Click DELETE to remove the selected authentication enable list from the configuration. You
6.
can only use this button if you have Read/Write access. The change will not be retained
across a power cycle unless you perform a save.
Dot1x Authentication List
You use this page to configure dot1x lists. A dot1x list specifies the authentication method(s)
you want to be used to validate port access for the users associated with the list. Only one
dot1x can be supported.
To display the Dot1x Authentication List page, click Security
Dot1x Authentication List.
Authentication List
List Name - Select the dot1x list name for which you want to configure data.
1.
Use the dropdown menu to select the method that should appear first in the selected
2.
authentication login list. The options are:
Local - The user's locally stored ID and password will be used for authentication.
•
Radius - The user's ID and password will be authenticated using the RADIUS server
•
instead of locally.
None - The user will not be authenticated.
•
HTTP Authentication List
You use this page to configure HTTP lists. A HTTP list specifies the authentication method(s)
you want used to validate switch or port access through HTTP.
To display the HTTP Authentication List page, click Security
Authentication List
HTTP Authentication List.
Web Management User Guide
238
Management Security >
Management Security >