Certificate Management - NETGEAR GSM7212P User Manual

Use HTTPS Port to set the HTTPS Port Number. The value must be in the range of 1 to
4.
65535. Port 443 is the default value. The currently configured value is shown when the web
page is displayed.
Use HTTPS Session Soft Timeout(Minutes) to set the inactivity time-out for HTTPS
5.
sessions. The value must be in the range of (1 to 60) minutes. The default value is 5
minutes. The currently configured value is shown when the web page is displayed.
Use HTTPS Session Hard Timeout(Hours) to set the hard time-out for HTTPS sessions.
6.
This time-out is unaffected by the activity level of the session. The value must be in the
range of (1 to 168) hours. The default value is 24 hours. The currently configured value is
shown when the web page is displayed.
Use Maximum Number of HTTPS Sessions to set the maximum allowable number of
7.
HTTPS sessions. The value must be in the range of (0 to 16). The default value is 16. The
currently configured value is shown when the web page is displayed.
Field
Certificate Present
Authentication List

Certificate Management

Use this menu to generate or delete certificates.
To display the Certificate Management page, click Security
Certificate Management.
Use None to specify there is no certificate management. This is the default selection.
1.
Use Generate Certificates to begin generating the Certificate files.
2.
Use DELETE Certificates to delete the corresponding Certificate files, if present.
3.
Web Management User Guide
Description
Displays whether there is a certificate present on the
device.
Displays authentication list for HTTPS.
244
 
Access > HTTPS HTTPS