Global Configuration
To display this page, click System
similar to the following displays.
Use Admin Mode to specify whether the ISDP Service is to be Enabled or Disabled.
1.
The default value is Enabled.
Use Timer to specify the period of time between sending new ISDP packets. The range is 5
2.
to 254 seconds. Default value is 30 seconds.
Use Hold Time to specify the hold time for ISDP packets that the switch transmits. The hold
3.
time specifies how long a receiving device should store information sent in the ISDP packet
before discarding it. The range 10 to 255 seconds. Default value is 180 seconds.
Use Version 2 Advertisements to enable or disable the sending of ISDP version 2 packets
4.
from the device. The default value is Enabled.
The following table describes the ISDP Advanced Global Configuration fields.
Field
Neighbors table last time changed
Device ID
Device ID format capability
Device ID format
Web Management User Guide
ISDP
Advanced
Description
Displays when the Neighbors table last changed.
Displays the device ID of this switch.
Displays the device ID format capability.
Displays the device ID format.
89
Global Configuration. A screen