Command Log Configuration; Console Log Configuration - NETGEAR GSM7212P User Manual

Command Log Configuration

To access the Command Log Configuration page, click Monitoring
Configuration.
Use Admin Mode to enable/disable the operation of the CLI Command logging by
1.
selecting the corresponding radio button.

Console Log Configuration

This allows logging to any serial device attached to the host.
To access the Console Log Configuration page, click Monitoring
Configuration.
A log that is "Disabled" shall not log messages. A log that is "Enabled" shall log
1.
messages. Enable or Disable logging by selecting the corresponding radio button.
Severity Filter. A log records messages equal to or above a configured severity threshold.
2.
Select the severity option by selecting the corresponding line on the pull-down entry field.
These severity levels have been enumerated below:
Emergency (0) - system is unusable
•
Alert (1) - action must be taken immediately
•
Critical (2) - critical conditions
•
Error (3) - error conditions
•
Warning (4) - warning conditions
•
Notice(5) - normal but significant conditions
•
Informational(6) - informational messages
•
Debug(7) - debug-level messages
•
Web Management User Guide
324

Logs > Command Log

Logs > Console Log