NETGEAR GSM7212P User Manual page 271

Private Group Membership
To display the Private Group Membership page, click Security

Group Private Group Membership.
Use Group ID to select the Group ID for which you want to display or configure data.
1.
Use Port List to add the ports you selected to this private group.
2.
Field
Group Name
Group Mode
Web Management User Guide
Description
This field identifies the name for the Private Group
you selected. It can be up to 24 non-blank characters
long.
This field identifies the mode of the Private Group
you selected. The modes are:
• community
• isolated
The group mode can be either "isolated" or
"community". When in "isolated" mode, the member
port in the group cannot forward its egress traffic to
any other members in the same group. By default,
the mode is "community" mode that each member
port can forward traffic to other members in the same
group, but not to members in other groups.
271

Traffic Control> Private