NETGEAR GSM7212P User Manual page 80

Use Interface to specify the list of ports on which LLDP-MED - 802.1AB can be
1.
configured.
Use MED Status to specify whether LLDP-MED mode is enabled or disabled on this
2.
interface.
Use Notification Status to specify the LLDP-MED topology notification mode of the
3.
interface.
Use Transmit Type Length Values to specify which optional type length values (TLVs) in
4.
the LLDP-MED will be transmitted in the LLDP PDUs frames for the selected interface:
MED Capabilities - To transmit the capabilities TLV in LLDP frames.
•
Network Policy - To transmit the network policy TLV in LLDP frames.
•
Location Identification - To transmit the location TLV in LLDP frames.
•
Extended Power via MDI - PSE - To transmit the extended PSE TLV in LLDP frames.
•
Extended Power via MDI - PD - To transmit the extended PD TLV in LLDP frames.
•
Inventory Information - To transmit the inventory TLV in LLDP frames.
•
The following table describes the LLDP-MED Interface Configuration fields.
Web Management User Guide
80