Advanced - NETGEAR GSM7212P User Manual

Advanced

From the Advanced link, you can access the following pages:
• CoS Configuration
• 802.1p to Queue Mapping
• IP DSCP to Queue Mapping
• CoS Interface Configuration
• Interface Queue Configuration
CoS Configuration
To display the CoS Configuration page, click QoS
Use Global to specify all CoS configurable interfaces. The option "Global" represents
1.
the most recent global configuration settings.
Use Interface to specify CoS configuration settings based per-interface.
2.
Use Global Trust Mode to specify whether to trust a particular packet marking at ingress.
3.
Global Trust Mode can only be one of the following. Default value is trust dot1p.
untrusted
•
trust dot1p
•
trust ip-dscp
•
Use Interface Trust Mode to specify whether to trust a particular packet marking at ingress.
4.
Interface Trust Mode can only be one of the following. Default value is untrusted.
untrusted
•
trust dot1p
•
trust ip-dscp
•
Web Management User Guide
on page 199
on page 200 (Advanced)
on page 201 (Advanced
on page 202 (Advanced)
on page 203 (Advanced)
199
  
CoS Advanced CoS Configuration.