Port Pvid Configuration - NETGEAR GSM7212P User Manual

Port PVID Configuration

The Port PVID Configuration screen lets you assign a port VLAN ID (PVID) to an interface.
There are certain requirements for a PVID:
All ports must have a defined PVID.
•
If no other value is specified, the default VLAN PVID is used.
•
If you want to change the port's default PVID, you must first create a VLAN that includes
•
the port as a member.
Use the Port VLAN ID (PVID) Configuration page to configure a virtual LAN on a port.
•
To access the Port PVID Configuration page, click Switching
PVID Configuration.
To configure PVID information:
Click ALL to display information for all Physical ports and LAGs.
1.
Select the check box next to the interfaces to configure. You can select multiple interfaces to
2.
apply the same setting to the selected interfaces. Select the check box in the heading row to
apply the same settings to all interfaces.
Use Interface to select the interface you want to configure.
3.
Use PVID to specify the VLAN ID you want assigned to untagged or priority tagged frames
4.
received on this port. The factory default is 1.
Web Management User Guide
103
  
VLAN Advanced Port