Troubleshooting; Ping Ipv4 - NETGEAR GSM7212P User Manual

Troubleshooting

The Troubleshooting menu contains links to the following options:
on page 349
•

Ping IPv4

on page 350
• Ping IPv6
• Traceroute IPv4
• Traceroute IPv6
Ping IPv4
Use this screen to tell the switch to send a Ping request to a specified IP address. You can
use this to check whether the switch can communicate with a particular IP station. Once you
click the APPLY button, the switch will send specified number of ping requests and the results
will be displayed.
If a reply to the ping is not received, you will see:
Tx = Count, Rx = 0 Min/Max/Avg RTT = 0/0/0 msec
•
If a reply to the ping is received, you will see:
Received response for Seq Num 0 Rtt xyz usec
•
Received response for Seq Num 1 Rtt abc usec
•
Received response for Seq Num 2 Rtt def usec
•
Tx = Count, Rx = Count Min/Max/Avg RTT = xyz/abc/def msec.
•
To access the Ping IPv4 page, click Maintenance
To configure the settings and ping a host on the network:
Web Management User Guide
on page 351
on page 352

Troubleshooting
349

Ping IPv4.