Private Group
The Private Group folder contains links to the following features:
•
Private Group Configuration
•
Private Group Membership
Private Group Configuration
To display the Private Group Configuration page, click Security
Group
Private Group Configuration.
Use Group Name to enter the Private Group name to be configured. The name string
1.
can be up to 24 bytes of non-blank characters.
Use the optional Group ID field to specify the private group identifier. If not specified, a
2.
group id not used will be assigned automatically. The range of group id is (1 to 192).
Use Group Mode to configure the mode of private group. The group mode can be either
3.
"isolated" or "community". When in "isolated" mode, the member port in the group cannot
forward its egress traffic to any other members in the same group. By default, the mode is
"community" mode that each member port can forward traffic to other members in the same
group, but not to members in other groups.
Click ADD to create a new private group in the switch.
4.
Click DELETE to delete a selected private group from the switch.
5.
Web Management User Guide
on page 270
on page 271
270
Traffic Control> Private