NETGEAR GSM7212P User Manual page 276

DHCP Snooping Configuration
Use DHCP Snooping Mode to enable or disable the DHCP Snooping feature. The
1.
factory default is disabled.
Use MAC Address Validation to enable or disable the validation of sender MAC Address
2.
for DHCP Snooping. The factory default is enabled.
DHCP Snooping VLAN Configuration
Use VLAN ID to enter the VLAN for which the DHCP Snooping Mode is to be enabled.
1.
Use DHCP Snooping Mode to enable or disable the DHCP Snooping feature for entered
2.
VLAN. The factory default is disabled.
Click APPLY to apply the new configuration and cause the changes to take effect. These
3.
changes will not be retained across a power cycle unless a save configuration is performed.
Web Management User Guide
276