NETGEAR GSM7212P User Manual page 150

MVR Group Membership
To display the MVR Configuration page, click Switching > MVR > Advanced > MVR Group
Membership. A screen similar to the following displays.
Use the Group IP to specify the IP multicast address of the MVR group for which you
1.
want to display or configure data.
Use the Port List to shows the configured list of members of the selected MVR group.
2.
You can use this port list to add the ports you selected to this MVR group.
Click CANCEL to cancel the configuration on the screen and reset the data on the screen.
3.
Click APPLY to send the updated configuration to the switch. Configuration changes take
4.
effect immediately.
MVR Statistics
To display the MVR Configuration page, click Switching > MVR > Advanced > MVR
Statistics. A screen similar to the following displays.
Click REFRESH to refresh the web page to show the latest MVR statistics.
1.
Web Management User Guide
150