Oob 1G Ethernet Port; Mini Usb Console Port; Rj-45 Rs232 Console Port; Reset Button - NETGEAR ProSAFE M4200 Series Hardware Installation Manual

A device that you attach to the USB port must comply with the following requirements:
• The USB device must support USB 2.0.
• The USB device must support the FAT32 or VFAT file type. The NTFS file type is not
supported.
Because of hardware limitations, the write and read speed to and from a USB device is about
1 Mbps.

OOB 1G Ethernet Port

The switch provides one out-of-band 1G10BASE-T RJ-45 Ethernet port that lets you access
the switch over its web management interface, Telnet, or SSH.

Mini USB Console Port

The switch provides one mini USB console port for console access only. The product
package includes one USB console cable with one mini B connector and one type A
connector. You can use this cable to connect the mini USB console port on the switch to a
USB port on a VT100-compatible terminal or a Windows computer that runs VT100 terminal
emulation software.
Note: For you to be able to use the mini USB port and access the switch
from a Windows-based computer that runs VT100 terminal emulation
software, you must install the USB driver on the computer. To
download the VT100 terminal emulation software and Windows USB
driver, visit www.netgear.com/support, enter your model number in
the search box, and click the Downloads button on the product page.

RJ-45 RS232 Console Port

The switch provides one RJ-45 RS232 console port for console access only. This serial port
is configured for 115200 baud, eight data bits, one stop bit, and no parity. The product
package includes one console cable with one DB9 connector and one RJ-45 connector. You
can use this cable to connect the RJ-45 RS23 console port on the switch to a DB9 port on a
VT100-compatible terminal or a Windows computer that runs VT100 terminal emulation
software.

Reset Button

The switch provides a Reset button on the front panel so that you can reboot the switch.
Save the configuration before you press the Reset button.
Hardware Overview
Managed Switch Series M4200
16 Hardware Installation Guide