Dynamic ARP Inspection
The Dynamic ARP Inspection (DAI) folder contains links to the following features:
•
DAI Configuration
•
DAI VLAN Configuration
•
DAI Interface Configuration
•
DAI ACL Configuration
•
DAI ACL Rule Configuration
on page 286
•
DAI Statistics
DAI Configuration
To display the DAI Configuration page, click Security
DAI Configuration.
Use Validate Source MAC to choose the DAI Source MAC Validation Mode for the
1.
switch by selecting Enable or Disable radio button. If you select Enable, Sender MAC
validation for the ARP packets will be enabled. The factory default is disable.
Use Validate Destination MAC to choose the DAI Destination MAC Validation Mode for the
2.
switch by selecting Enable or Disable radio button. If you select Enable, Destination MAC
validation for the ARP Response packets will be enabled. The factory default is disable.
Use Validate IP to choose the DAI IP Validation Mode for the switch by selecting Enable or
3.
Disable radio button. If you select Enable, IP Address validation for the ARP packets will be
enabled. The factory default is disable.
DAI VLAN Configuration
To display the DAI VLAN Configuration page, click Security
Inspection
DAI VLAN Configuration.
Web Management User Guide
on page 283
on page 283
on page 285
on page 285
on page 286
283
Control> Dynamic ARP Inspection
Control> Dynamic ARP