Ipv6 Class Configuration - NETGEAR GSM7212P User Manual

Precedence Value -This lists the keywords for the IP Precedence value in the range 0
•
to 7.
IP ToS - Configure the IP ToS field:
•
ToS Bits - This is the Type of Service octet value in the range 00 to ff to compare
•
against.
ToS Mask - This indicates which ToS bits are subject to comparison against the
•
Service Type value.
Click CANCEL to cancel the configuration on the screen. Resets the data on the screen to
5.
the latest value of the switch.
Click APPLY to send the updated configuration to the switch. Configuration changes take
6.
effect immediately.

IPv6 Class Configuration

Use the IPv6 Class Configuration page to add a new IPv6 DiffServ class name, or to rename
or delete an existing class. The page also allows you to define the criteria to associate with a
DiffServ class. As packets are received, these DiffServ classes are used to prioritize packets.
You can have multiple match criteria in a class. The logic is a Boolean logical-and for this
criteria. After creating a Class, click the class link to the Class page.
To display the page, click QoS
To configure a DiffServ class:
To create a new class, enter a class name, select the class type, and click ADD. This
1.
field also lists all the existing DiffServ class names, from which one can be selected.
The switch supports only the Class Type value All, which means all the various match
criteria defined for the class should be satisfied for a packet match. All signifies the logical
AND of all the match criteria. Only when a new class is created, this field is a selector
field. After class creation this becomes a non-configurable field displaying the configured
class type.
To rename an existing class, select the check box next to the configured class, update the
2.
name, and click APPLY.
To remove a class, click the check box beside the Class Name, then click DELETE.
3.
Click REFRESH to refresh the page with the most current data from the switch.
4.
Click CANCEL to cancel the configuration on the screen and reset the data on the screen to
5.
the latest value of the switch. After creating a Class, click the class link to the Class page.
Web Management User Guide
 
DiffServ Advanced
214

IPv6 Class Configuration.