NETGEAR GSM7212P User Manual page 58

The Unit Selection field displays the current PoE unit. To change the PoE unit, select
1.
another unit from the drop down box.
The following table describes the PoE Configuration non-configurable fields.
Field
Units
Firmware Version
Power Status
Total Power (Main AC)
Total Power (RPS)
Power Source
Threshold Power
Consumed Power
Web Management User Guide
Description
Displays the Current PoE Unit. You can change the
PoE Unit by selecting another unit ID listed here.
Version of the PoE controller's FW image.
Indicates the power status.
Displays the total power provided by the main ac
power source.
Displays the total power provided by the redundant
power source.
Current source of system power (Main AC or RPS).
System can powerup one port, if consumed power is
less than this power. i.e. Consumed power can be
between Nominal & Threshold Power values. The
threshold power value is effected by changing
System Usage Threshold.
Total amount of a power which is currently being
delivered to all ports.
58