Ipv6 Acl - NETGEAR GSM7212P User Manual

Prosafe managed switch
Hide thumbs Also See for GSM7212P:
Table of Contents

Advertisement

possibly selection one of the DSCP keyword from a dropdown box. If a value is to
be selected by specifying its numeric value, then select the 'Other' option in the
dropdown box and a text box will appear where the numeric value of the DSCP
can be entered.
IP Precedence - The IP Precedence field in a packet is defined as the high-order
three bits of the Service Type octet in the IP header. This is an optional
configuration. Enter an integer from 0 to 7.
IP TOS - The IP TOS field in a packet is defined as all eight bits of the Service
Type octet in the IP header. The TOS Bits value is a hexadecimal number from 00
to FF. The TOS Mask value is a hexadecimal number from 00 to FF. The TOS
Mask denotes the bit positions in the TOS Bits value that are used for comparison
against the IP TOS field in a packet. For example, to check for an IP TOS value
having bits 7 and 5 set and bit 1 clear, where bit 7 is most significant, use a TOS
Bits value of 0xA0 and a TOS Mask of 0xFF. This is an optional configuration.
To delete an IP ACL rule, select the check box associated with the rule, and then click
3.
DELETE.
Click CANCEL to cancel the configuration on the screen and reset the data on the screen to
4.
the latest value of the switch.
To modify an existing IP Extended ACL rule, click the Rule ID. The number is a hyperlink to
5.
the Extended ACL Rule Configuration page.

IPv6 ACL

An IP ACL consists of a set of rules which are matched sequentially against a packet. When
a packet meets the match criteria of a rule, the specified rule action (Permit/Deny) is taken
and the additional rules are not checked for a match. On this menu the interfaces to which an
IP ACL applies must be specified, as well as whether it applies to inbound or outbound traffic.
Rules for the IP ACL are specified/created using the IP ACL Rule Configuration menu.
To display the IPv6 ACL page, click Security
IP ACL is the IP ACL ID or IP ACL Name which is dependent on the IP ACL Type. IP
1.
ACL ID must be an integer from 1 to 99 for an IP basic ACL and from 100 to 199 for an
Web Management User Guide
ACL> Advanced
300
IPv6 ACL.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gsm7224pGsm5212pGsm7212f

Table of Contents