Diffserv Wizard - NETGEAR GSM7212P User Manual

occurs. A policy can contain multiples classes. When the policy is active, the actions taken
depend on which class matches the packet.
Packet processing begins by testing the class match criteria for a packet. A policy is applied
to a packet when a class match within that policy is found.
The Differentiated Services menu page contains links to the various Diffserv configuration
and display features.
From the DiffServ link under the QoS tab, you can access the following pages:
on page 205
•

DiffServ Wizard

• Auto VoIP Configuration
on page 207
• Basic
on page 209
• Advanced
DiffServ Wizard
The DiffServ Wizard enables DiffServ on the switch by creating a traffic class, adding the
traffic class to a policy, and then adding the policy to the ports selected on DiffServ Wizard
page. The DiffServ Wizard will:
Create a DiffServ Class and define match criteria used as a filter to determine if incoming
•
traffic meets the requirements to be a member of the class.
Set the DiffServ Class match criteria based on Traffic Type selection as below:
•
VOIP - sets match criteria to UDP protocol.
•
HTTP - sets match criteria to HTTP destination port.
•
FTP - sets match criteria to FTP destination port.
•
Telnet - sets match criteria to Telnet destination port.
•
Every - sets match criteria all traffic.
•
Create a Diffserv Policy and add it to the DiffServ Class created.
•
If Policing is set to YES, then DiffServ Policy style is set to Simple. Traffic which
•
conforms to the
Class Match
Priority selection. Outbound Priority configures the handling of conforming traffic as
below:
High - sets policing action to markdscp ef.
•
Med - sets policing action to markdscp af31.
•
Low - sets policing action to send.
•
If Policing is set to NO, then all traffic will be marked as specified below:
•
High - sets policy mark ipdscp ef.
•
Med - sets policy mark ipdscp af31.
•
Low - sets policy mark ipdscp be.
•
Each port selected will be added to the policy created.
•
To display the DiffServ Wizard page, click QoS
Web Management User Guide
on page 207
criteria will be processed according to the Outbound

DiffServ
205

DiffServ Wizard.