Syslog Configuration - NETGEAR GSM7212P User Manual

SysLog Configuration

To access the SysLog Configuration page, click Monitoring
Use Admin Status to enable/disable logging to configured syslog hosts. Setting this to
1.
disable stops logging to all syslog hosts. Disable means no messages will be sent to
any collector/relay. Enable means messages will be sent to configured collector/relays
using the values configured for each collector/relay. Enable/Disable the operation of the
syslog function by selecting the corresponding radio button.
Use Local UDP Port to specify the port on the local host from which syslog messages are
2.
sent. The default port is 514. Specify the local port in the text field.
Field
Messages Relayed
Messages Ignored
Web Management User Guide
Description
The count of syslog messages relayed.
The count of syslog messages ignored.
325

Logs > Sys Log Configuration.