Use Local File Name to specify the local script file name you want to upload.
2.
USB File Upload
Use this menu to upload a file from the switch to USB device.
To display the HTTP File Upload page, click Maintenance
Use File Type to specify what type of file you want to upload:
1.
Archive - Specify archive (STK) code when you want to retrieve from the operational
•
flash:
Image1 - Specify the code image1 when you want to retrieve.
•
Image2 - Specify the code image2 when you want to retrieve.
•
Text Configuration to specify configuration in text mode when you want to retrieve
•
the stored configuration. The factory default is Archive.
Use USB File to give a name along with path for the file you want to upload. You may enter
2.
up to 32 characters. The factory default is blank.
Click CANCEL to cancel the configuration on the screen and reset the data on the screen to
3.
the latest value of the switch.
Click APPLY to send the updated configuration to the switch. Configuration changes take
4.
effect immediately.
Download File To Switch
The switch supports system file downloads from a remote system to the switch by using
either TFTP or HTTP.
The Download menu contains links to the following options:
•
File Download
•
HTTP File Download
Web Management User Guide
on page 343
on page 344
Upload
342
USB File Upload.