Sntp Global Configuration - NETGEAR GSM7212P User Manual

Web Management User Guide
Polling for Unicast information is used for polling a server for which the IP address is known.
SNTP servers that have been configured on the device are the only ones that are polled for
synchronization information. T1 through T4 are used to determine server time. This is the
preferred method for synchronizing device time because it is the most secure method. If this
method is selected, SNTP information is accepted only from SNTP servers defined on the
device using the SNTP Server Configuration page.
The device retrieves synchronization information, either by actively requesting information or
at every poll interval.

SNTP Global Configuration

Use the SNTP Global Configuration page to view and adjust date and time settings.
To display the SNTP Global Configuration page, click System
 
Management > Time SNTP
Global Configuration.
32