Field
Status
Fault Status
PoE PD Port Status
The PoE PD Port Status is only available on the GSM5212P switch.
Note:
To display the Advanced PoE PD Port Status page, click System > Services > PoE >
Advanced > PoE PD Port Status. A screen similar to the following displays.
Web Management User Guide
Description
The status is the operational status of the port PD
detection.
Disabled - indicates no power being
•
delivered.
DeliveringPower - indicates power
•
is being drawn by device.
Fault - indicates a problem with the
•
port.
Test - indicates port is in test mode.
•
otherFault - indicates port is idle
•
due to error condition.
Searching - indicates port is not in
•
one of the above states.
Describes the error description when the PSE port is
in fault status. No Error indicates that the PSE port is
not in any error state. MPS Absent indicates that the
PSE port has detected an absence of main power
supply. Short indicates that the PSE port has
detected a short circuit condition. Overload indicates
that the pd connected to the PSE port had tried to
provide more power than it is permissible by the
hardware. Power Denied indicates that the PSE port
has been denied power because of shortage of
power or due to administrative action.
63