Host Configuration - NETGEAR GSM7212P User Manual

To remove a DNS server from the list, select the check box next to the server you want to
6.
remove and click DELETE. If no DNS server is specified, the check box is global and will
delete all the DNS servers listed.
Click CANCEL to cancel the configuration on the screen and reset the data on the screen to
7.
the latest value of the switch.
Click APPLY to send the updated configuration to the switch. Configuration changes take
8.
effect immediately.
Click ADD to add the specified DNS Server to the List of DNS Servers. Configuration
9.
changes take effect immediately.
Click DELETE to delete the specified DNS Server from the list of DNS Servers. If no DNS
10.
Server is specified then it will delete all the DNS Servers
DNS Server Configuration
The following table displays DNS Server Configuration information.
Field
Serial No
Preference

Host Configuration

Use this page to manually map host names to IP addresses or to view dynamic DNS
mappings.
To access this page, click System
To add a static entry to the local DNS table:
Specify the static host name to add. Its length can not exceed 255 characters and it is a
1.
mandatory field for the user.
Specify the IP address in standard IPv4 dot notation to associate with the hostname.
2.
Web Management User Guide
Description
The sequence number of the DNS server.
Shows the preference of the DNS Server. The
preference is determined by the order they were
entered.
 
Management DNS
39

Host Configuration.