Gl2 Settings - Canon imagePROGRAF iPF510 User Manual

GL2 Settings

Setting Item
GL2 Replot
GL2 BufferClear
Color Mode
Print Quality
Input Reso.
Media Source
Conserve Paper
End Point Shape
Smoothing
Line Width
ThicknFineLines
Adj Faint Lines
Print the last printed job (still stored in the printer memory) again.
Delete the last job printed using HP-GL/2, still stored in the printer memory.
Choose the color mode.
Choose the print quality.
Choose the printer input resolution, 600dpi or 300dpi.
Choose the media source for HP-GL/2 printing.
Conserves paper when printing.
Choose the shape of the end point, determined by Software or Rounded.
•
If you choose Software
Operation is determined by the application. If nothing is specied by the
application, the result is as shown in the gure.
•
If you choose Rounded
Choose whether to print arcs as smooth curved lines or as multiple connected
line segments.
•
If you choose Software
Operation is determined by the application. If nothing is specied by the
application, the result is as shown in the gure.
Note: By default, this is a 72-sided gure
•
If you choose Smooth
Choose the width for printing lines if no width is specied in the data. Dots in the
line width are 300 dpi each.
Select On to print ne lines more distinctly.
If ne lines are printed in colors that do not match the colors of other shapes,
selecting Off may help produce the expected results. However, lines in some
colors may appear broken.
Description, Instructions
Control Panel
Printer Parts 55