Control Panel
GL2 Settings
GL2 Replot
GL2 BufferClear
Color Mode
Print Quality
Input Resolution
Media Source
Conserve Paper
Line Cap
Smoothing
Line Width
52 Printer Parts
Setting Item
Monochrome
Color (CAD) 1
Color (CAD) 2
Description, Instructions
Print the last printed job (still stored in the printer memory)
again.
Delete the last job printed using HP-GL/2, still stored in the
printer memory.
Print in monochrome.
Print in standard colors.
Print in brighter colors.
Choose the print quality.
Choose the printer input resolution, 600dpi or 300dpi.
Choose the media source for HP-GL/2 printing.
Conserves paper when printing.
Choose the shape of the end point, determined by
Software or Rounded.
•
If you choose Software
Operation is determined by the application. If nothing
is specied by the application, the result is as shown
in the gure.
•
If you choose Rounded
Choose whether to print arcs as smooth curved lines or as
multiple connected line segments.
•
If you choose Software
Operation is determined by the application. If nothing
is specied by the application, the result is as shown
in the gure.
Note: By default, this is a 72-sided gure
•
If you choose Smooth
Choose the width for printing lines if no width is specied in
the data. Dots in the line width are 300 dpi each.