GL2 Settings
Setting Item
GL2 Replot
GL2 BufferClear
Color Mode
Print Quality
Input Resolution
Media Source
Conserve Paper
Line Cap
Smoothing
Line Width
ThickenFineLines
AdjustFaintLines
Print the last printed job (still stored in the printer memory) again.
Delete the last job printed using HP-GL/2, still stored in the printer memory.
Choose the color mode.
Choose the print quality.
Choose the printer input resolution, 600dpi or 300dpi.
Choose the media source forHP-GL/2 printing.
Conserves paper when printing.
Choose the shape of the end point, determined by Software or Rounded.
•
If you choose Software
Operation is determined by the application. If nothing is specied by the application,
the result is as shown in the gure.
•
If you choose Rounded
Choose whether to print arcs as smooth curved lines or as multiple connected line
segments.
•
If you choose Software
Operation is determined by the application. If nothing is specied by the application,
the result is as shown in the gure.
Note: By default, this is a 72-sided gure
•
If you choose Smooth
Choose the width for printing lines if no width is specied in the data. Dots in the line
width are 300 dpi each.
Select On to print ne lines more distinctly.
If ne lines are printed in colors that do not match the colors of other shapes, selecting
Off may help produce the expected results. However, lines in some colors may
appear broken.
Description, Instructions
Control Panel
Printer Parts 59