Installing And Removing The Rack Handles; Installing The Rack Handles; Figure 95. Installing The Rack Handle - Intel SR1530CL - Server System - 0 MB RAM User Manual

Installing and Removing the Rack Handles

Installing the Rack Handles

1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the front bezel if it is installed. For instructions, see
Bezel" on page
4. Attach the rack handle to the server system with two screws as shown in the
following figure.
5. Repeat step 4 on the opposite side of the server.
6. Optional: Install the front bezel, if desired. For instructions, see
Front Bezel" on page
7. Plug all peripheral devices and the AC power cable into the server.
Server System User Guide
iii.
26.

Figure 95. Installing the Rack Handle

27.
"Removing the Front
AF001204
"Installing the
"Safety
95