Appendix A: Technical Reference; Cable Routing - Intel SR1530CL - Server System - 0 MB RAM User Manual

Appendix A: Technical Reference

Cable Routing

When you add or remove components from your server system, make sure your cables are
routed correctly before reinstalling the server system cover. Use caution to make sure no
cables or wires are pinched and that the airflow from the fans is not blocked. Use the
figures below to determine the correct cable routing.
For readability, two figures are included below to show the cable routing. Make sure all
necessary power and data cables are connected and routed as shown. Dashed lines in the
drawings indicate a location where a cable is routed beneath a component and each
connector end is labeled with the same letter. For example, the PCI cooling fan cable is
labeled with the letter "E" both where it connects to the server board and at the PCI
cooling fan itself.
Server System User Guide 97