Installing And Removing The Rack Handles; Installing The Rack Handles; Removing The Rack Handles - Intel JBOD 2000 Service Manual

Hardware Installations and Upgrades
6. Secure the stiffener with the six screws (see letter "G").
Figure 43. Installing 2.5" hard drive backplane – install the stiffener
7. Connect cables to the backplane. Please refer to

Installing and Removing the Rack Handles

Installing the Rack Handles

Align the rack handle with the two holes on the side of the server system and attach the rack handle
to the server system with two screws as shown.

Removing the Rack Handles

Remove the two screws holding the rack handle in place, and remove the rack handle from the
server system as shown.
28
"Cable
Figure 44. Installing the Rack Handle
Routing".
®
Intel JBOD2000 Family Service Guide