Installing A Hot-Swap Sas/Sata Drive (Sr1530Hcl/Sr1530Hcls And Sr1530Hclr/ Sr1530Hclsr); Sr1530Hclr/Sr1530Hclsr); Figure 42. Locating Drive Positions; Figure 43. Removing The Drive Carrier - Intel SR1530CL - Server System - 0 MB RAM User Manual

Installing a Hot-Swap SAS/SATA Drive (SR1530HCL/
SR1530HCLS and SR1530HCLR/SR1530HCLSR)
1. Remove the front bezel if it is installed. For instructions, see
Bezel" on page
2. Locate the drive position you want to use. See the following figure for drive
positions.
Figure 42. Locating Drive Positions (SR1530HCL/SR1530HCLS and
3. Open the latch at the front of the hard drive carrier. See letter "A" in the following
figure.
Figure 43. Removing the Drive Carrier (SR1530HCL/SR1530HCLS and
48
26.

SR1530HCLR/SR1530HCLSR)

A
SR1530HCLR/SR1530HCLSR)
"Removing the Front
AF001619
AF001620
Server System User Guide