Figure 88. Removing Blower Bracket With System Blowers From Server System - Intel SR1530CL - Server System - 0 MB RAM User Manual

6. Remove the two screws that secure the blower bracket in place. Save these screws.
You will re-install them later (see letter "A" in the following figure).
Remove the blower cable from beneath the clip at the front of the blower bracket
(see letter "B").
Lift the blower bracket from the server. Lift the bracket at an angle, the front of the
bracket first, to clear the hard disk drive brackets (see letter "C").
A
B
C
AF000990
Figure 88. Removing Blower Bracket with System Blowers from Server
System (SR1530CL/SR1530CLR)
Server System User Guide 89