Clearing The Remote Management Agent Password; Clearing Remote Management Agent Log Files; Starting Remote Management Operations Using The Zenworks Control Center; Initiating A Remote Management Session From Common Tasks - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual

36.2.2 Clearing the Remote Management Agent Password

To clear the Agent password on the managed device, enter the following command at the shell
prompt:
# /opt/novell/zenworks/sbin/zrmservice --clrpasswd

36.2.3 Clearing Remote Management Agent Log Files

To clear the Agent log files on the managed device, enter the following command at the shell
prompt:
# /opt/novell/zenworks/sbin/zrmservice --clearlog
36.3 Starting Remote Management Operations
Using the ZENworks Control Center
The ZENworks Control Center is the comprehensive web-based control interface for ZENworks 7
Linux Management. It provides an intuitive and task-driven console to manage various ZENworks
components including Remote Management.
You can initiate various Remote Management operations from the following locations:
Section 36.3.1, "Initiating a Remote Management Session from Common Tasks," on page 501
Section 36.3.2, "Initiating a Remote Management Session from the Device Context," on
page 502
36.3.1 Initiating a Remote Management Session from Common
Tasks
1 In the ZENworks Control Center, click Devices.
2 In Device Tasks in the left pane, click Remote Control Device to open the following dialog box:
3 In the IP address field, specify the IP address or DNS name of the device you want to remotely
control.
4 Select the Remote Management operation to be performed on the device. The available options
are Remote control, Remote view, and Remote login.
The following table lists and explains all the operations you can select from the drop-down list:
Setting Up Remote Management 501