HP 2600fx - Optical Disk Drive Command Reference Manual page 40

Table 2-1 Group 0 Commands (6-byte command)
Code
(hex.)
17H
1AH
1BH
1CH
1DH
1EH
Chapter 2
Name Description
Release Releases a specified logical
unit from the reservation
state
Mode Sense Reads optical disk, drive unit,
or controller unit parameters
Start/Stop Unit Starts or stops rotating the
optical disk, and/or ejects the
optical disk from the drive
unit
Receive Requests analysis data be
Diagnostic sent to the initiator
Results
Send Diagnostic Requests the disk controller
to perform diagnostic tests
Prevent/Allow Prevents or allows removal of
Medium the optical disk in the logical
Removal unit
SCSI-2 Drive Command Set
Numerical List of Commands
Page
Number
2-53
2-54
2-73
2-74
2-76
2-79
2-3