Table B-2. Request Sense Data (Bytes 12 And 13 - HP 2600fx - Optical Disk Drive Command Reference Manual

Table B-1
Table B-2
Autochanger Error Codes
Request Sense Error Codes
Request Sense - Sense Key Values — Byte 2, Bits 3 through 0
Sense Name
Key
0BH Aborted
Command
Request Sense Data (bytes 12 and 13)
Sense Sense
Code Key
and
Qualifier
00 00H 0H-NS
00 00H 1H-RE
04 00H 0B-AC
04 01H 2H-NR
04 02H 2H-NR
04 03H 2H-NR
04 88H 02-NR
04 89H 4H-HE
15 01H 4H-HE
1A 00H 5H-IR
20 00H 5H-IR
21 01H 5H-IR
B-4
Abbrev. Description
AC This sense key shall be
reported if a target or LUN
receives a second command
from the same initiator
before the previous command
from that initiator has
completed.
Description
No additional sense information
Error recovered invoked and completed
(Table B-6 on page B-14)
Aborted command (boot code)
Autochanger becoming ready
Unit must first initiate element status
Fatal error - unit must be corrected
manually
Firmware download needed (boot code)
Download checksum error
Move error (Check additional sense bytes)
(Table B-6 on page B-14)
Invalid parameter list length
Unsupported command
Invalid address - (Table B-3 on page B-7)
Appendix B