Control Mode Page (0Ah) - HP 2600fx - Optical Disk Drive Command Reference Manual

Control Mode Page (0AH)

Table 2-54 Control Mode Page (0AH)
a.For 9.1 and 5.2 Gbyte capacity drives only.
The parameters of the Control Mode Page are all reserved and cannot be
changed by the MODE SELECT command.
PS
DQue
For more information about the use of Byte 3 (Que Algorithm Modifier),
NOTE
see Table 2-34 on page 2-39.
Chapter 2
Byte 7 6
0 Reserved (0)
1
2
3
Que Algorithm Modifier
4 - 7
The Parameters Savable bit of 1 indicates this
parameter page is savable in non-volatile RAM.
A Disable Queuing bit of 1 indicates that command
queuing is disabled.
A Disable Queuing bit of 0 indicates that command
queuing is enabled.
Mode Sense (Group 0) Command (1AH)
5 4 3
Page Code (0AH)
Page Length (06H)
Reserved (0)
Reserved (0)
a
Reserved (0)
SCSI-2 Drive Command Set
2 1 0
DQue
2-63