HP 2600fx - Optical Disk Drive Command Reference Manual page 275

Table A-3
Error
Code
(hex.)
0543XXXX
0544XXXX
0545XXXX
0546XXXX
0547XXXX
0548XXXX
0549XXXX
054AXXXX
054BXXXX
054CXXXX
0551XXXX
0577XXXX
0578XXXX
0579XXXX
057AXXXX
057EXXXX
057FXXXX
0580XXXX
0581XXXX
Drive Error Codes
Internal Error Codes
Internal Error Codes
Message
DMA sector cannot be read
DDS data are invalid
SFP sector cannot be read
SFP data is invalid
Failed in Erase/Blank Check/Write/Read/Compare test after
disk load and spin-up
Spare area for defective sector is full
Failed updating DMA sectors
PEP data is invalid
Defective sector was recovered with automatic write
reallocation procedure
Failed in automatic write reallocation procedure
A blank sector was detected
Automatic Write Reallocation performed due to ID Error
Automatic Write Reallocation performed due to uncorrectable
ECC Error
Automatic Write Reallocation performed due to SYNCH Error
Automatic Write Reallocation performed due to Servo Fault
Error
ID Error recovered by retry
Uncorrectable ECC Error recovered by retry
SYNCH Error recovered by retry
Servo Fault Error recovered by retry
A-12 Appendix A