HP 2600fx - Optical Disk Drive Command Reference Manual page 302

Table B-6 Request Sense - Additional Sense Data
(For models 40fx, 80ex, 125ex and 220mx ONLY)
Byte 7 6
47-49 Reserved (0)
50-54 Micro-Move ID History (Table C-2 on page C-17)
55 Failed Micro-Move ID (Table C-2 on page C-17)
56 Micro-Move Error Code (Table B-11 on page B-36)
57-60 Vertical Motor Commanded Position
61-64 Vertical Motor Actual Position
65-68 Horizontal Motor Commanded Position
69-72 Horizontal Motor Actual Position
73-77 Reserved (0)
Move Error
Code
Hardware Error
Code
First FRU
Second FRU
Third FRU
NOTE The FRU numbers returned are indicators for the most likely cause of an
error, but may not be the actual cause of a problem. Simply changing the
FRU listed may or may not fix the associated problem.
Appendix B
5 4 3
The movement that was being performed when the
error occurred. The values of the Move Error Codes are
in Table B-9 on page B-29.
Determined by fault isolation, this error code indicates
the cause of the failure. The values of the Hardware
Error Codes are in Table B-8 on page B-22.
The most likely Field Replacable Unit to be the cause of
the failure. (See Table A-2 on page A-4)
The second most likely Field Replacable Unit to be the
cause of the failure. (See Table A-2 on page A-4.)
The third most likely Field Replacable Unit to be the
cause of the failure. (See Table A-2 on page A-4.)
Autochanger Error Codes
Additional Sense Data Format for Error Recovery
2 1 0
B-15