HP 2600fx - Optical Disk Drive Command Reference Manual page 324

Table B-11 Micro-Move Error Codes (For the 40fx, 80ex, 125ex, and 220mx
models ONLY)
Error Code
(hex.)
12
13
14
15
16
20
22
23
24
25
28
29
31
32
33
34
35
36
38
Appendix B
Description
Diagnose FRU failed.
Initial recovery failed.
Find home failed.
Picker initialization failed.
Cartridge-in-path beams are blocked.
Failed to find hard stop at end of flip.
Failed to see sensor close at the end of translate.
Failed to move to the vertical position needed to
engage the translate pin.
Failed to see sensor close at the start of translate.
Failed to see height sensor re-open after closing at the
start of a translate.
The translate distance was too long.
The translate distance was too short.
Failed while checking for cartridge in a drive.
Failed to find a hard stop returning cartridge to
storage after testing for presence of cartridge.
Failed while checking for cartridge in a storage slot.
Failed while checking for cartridge in the Picker.
Failed while checking for cartridge in the mailslot.
Could not free fingers after testing for a cartridge in a
drive.
Failed to verify that cartridge exists after insert.
Autochanger Error Codes
Jukebox Micro-Move Error Codes
B-37