HP 2600fx - Optical Disk Drive Command Reference Manual page 198

Table 3-8 Sense Key Field = Illegal Request (05H) and SKSV Bit = 1
Byte
C/D
BPV
Bit Pointer
Field Pointer
Bytes identified as being in error are not necessarily the bytes that need
NOTE
to be changed to correct the problem.
Chapter 3
7 6
15 SKSV C/D
(1)
16
17
1 = Illegal Parameter is in Command Descriptor Block.
0 = Illegal Parameter is in Data Out Phase.
1 = Bit pointer field is valid.
0 = Bit pointer field is invalid.
Specifies which bit is in error. When a multiple bit field
is in error, the pointer points to the most significant bit
in the field.
Specifies which byte is in error. Bytes are numbered
starting from 0. When a multiple-byte field is in error,
the pointer points to the most significant byte of the
field.
Request Sense Command (03H)
5 4 3
Reserved (0) BPV
Field Pointer (MSByte)
Field Pointer (LSByte)
Jukebox SCSI-2 Command Set
2 1 0
Bit Pointer
3-11