HP 2600fx - Optical Disk Drive Command Reference Manual page 192

Table 3-2 Alphabetical List of Commands
Throughout this section, a Control Byte (0) is vendor unique and should
NOTE
always be set to 0.
Chapter 3
Code Name
(hex.)
1CH Receive
Diagnostic
Results
17H Release
03H Request Sense
16H Reserve
01H Rezero Unit
0CH Rotate Mailslot
Command
Controls
1DH Send
Diagnostic
00H Test Unit
Ready
3BH Write Buffer
Command
Jukebox SCSI-2 Command Set
Alphabetical List of Commands
Description
Retrieves diagnostic test
information resulting from
the Send Diagnostic
Command
Releases the library for use by
multiple SCSI initiators.
Determines a specific error
condition when the library
fails to successfully complete
a command.
Reserves the library for use
by a single SCSI initiator.
Sets the library to a specific
predefined state.
Controls mailslot rotation.
Causes the library to perform
predefined diagnostic test/
exerciser routines.
Checks to determine if the
optical library is ready.
Writes data to the jukebox
Page
Number
3-33
3-20
3-8
3-18
3-7
3-13
3-35
3-6
3-39
3-5