HP 2600fx - Optical Disk Drive Command Reference Manual page 311

Table B-8
Error Code
(hex.)
39
3A
3B
MECHANISM ERROR CODES
3CH
3EH
40H
41H
42H
43H
44H
45H
46H
47H
48H
49H
4AH
Autochanger Error Codes
Hardware Error Codes
Hardware Error Codes (For the 40fx, 80ex, 125ex, and 220mx
models ONLY)
Failure Description
Drive 2 not connected
Drive 3 not connected
Drive 4 not connected
Unspecified mechanical failure
Unspecified servo failure
Unable to free the Picker fingers in preparation for
Carriage motion
Unable to verify that the Picker is at the Home position
during Find Home sequence (non-leadscrew side)
Unable to find Home; Cartridge-in-path sensor blocked
Unable to clear Cartridge-in-path sensors by moving
Picker fingers back
Carriage motion failure during Find Home sequence
Unable to free the Picker fingers in preparation for
translate motion
Carriage motion failed while initializing Home position
during Find Home sequence
Translate failed while moving towards non-leadscrew
side during Find Home sequence
Carriage motion failed during Carriage/Picker assembly
calibration (leadscrew side)
Carriage motion failed during Carriage/Picker assembly
calibration (non-leadscrew side)
Motion error while determining orientation of the Picker
B-24 Appendix B