Position To Element Command (2Bh) - HP 2600fx - Optical Disk Drive Command Reference Manual

Table 3-34
Jukebox SCSI-2 Command Set

Position To Element Command (2BH)

Position To Element Command (2BH)
This command positions the specified transport element in front of the
specified destination element.
Position To Element Command CDB
Byte 7 6
0
1 Logical Unit Number
(0)
2
3
4
5
6
7
8
9
Transport Element
Address The default address of zero is the best address for use.
(Changing from the default could result in a decrease in
jukebox performance.) However, this field can also be
set to a specific transport element address (see Table 3-
22 on page 3-23).
Destination Element
Address See Table 3-22 on page 3-23 in the description of the
Mode Sense Command for more information about
addressing.
Invert An Invert bit value of 1 requests the transport element
be inverted (flipped) before being placed in front of the
destination element.
3-38
5 4
Operation Code (2BH)
Transport Element Address (MSByte)
Transport Element Address (LSByte)
Destination Element Address (MSByte)
Destination Element Address (LSByte)
Reserved (0)
Reserved (0)
Reserved (0)
Control Byte (0)
3 2 1
Reserved (0)
Chapter 3
0
Invert