HP 2600fx - Optical Disk Drive Command Reference Manual page 322

Table B-10 Micro-Move Error Codes
Error Code
(hex.)
5A
5B
5C
5D
5E
5F
60
61
62
63
64
65
66
67
68
69
6A
6B
6C
6D
Appendix B
Failure Description
Command received to rotate mailslot but both pickers
are full
Back sensor in mailslot is bad
Front sensor in mailslot is bad
Command received to eject from the mailslot, but both
pickers are full
Attempt to load from an empty mailslot
Engaging the mailslot failed on a rotate in
Disengaging the mailslot failed on a rotate in
Rotate in catch error (not used)
Rotate in push out error (not used)
Rotate in armed failed (not used)
Did not detect hard stop on a rotate in
Rotate in was too much distance
Engaging the mailslot failed on a rotate out
Disengaging the mailslot failed on a rotate out
Did not detect hard stop on a rotate out
Rotate out distance was too short
Could not move thumbs out of the vertical path after a
rotate out
Vertical distance difference detected after error
recovery
Cartridge in mailslot incorrectly at rotate in
Mailslot rotate in accept fail
Autochanger Error Codes
Jukebox Micro-Move Error Codes
B-35