Initialize Element Status Command (07H) - HP 2600fx - Optical Disk Drive Command Reference Manual

Table 3-9
NOTE
Jukebox SCSI-2 Command Set

Initialize Element Status Command (07H)

Initialize Element Status Command (07H)
This command checks all elements for optical disks and for relevant
status. This information is retained and can be accessed through the
Read Element Status Command (B8H). Refer to Table 3-70 on page 3-68.
Initialize Element Status Command CDB
Byte 7
0
1 Logical Unit Number
(0)
2
3
4
5
This command takes a few minutes to complete
3-12
6 5 4
Operation Code (07H)
Reserved (0)
Reserved (0)
Reserved (0)
Control Byte (0)
3 2 1
Reserved (0)
Chapter 3
0