HP 2600fx - Optical Disk Drive Command Reference Manual page 328

Table B-12 Diagnostic Tests (EXCEPT for models 40fx, 80ex, 125ex, and
220mx)
No.
12
13
14
15
16
Appendix B
Front Panel Description
Test Name
Moves the disk transport mechanism up and
VERTICAL
down the full length of the rail. Returns
TEST
PASS/FAIL. No cartridges required.
Reports ON or OFF. Looks at translate
TRANSLATE
sensor.
SENSOR
Makes a combination of moves with a PASS/
FLIP TEST
FAIL result. It does several flips at various
locations. No optical disks are required.
Makes a combination of moves with a PASS/
MAGAZINE IO
FAIL result. It moves an optical disk from a
randomly-chosen full to a randomly-chosen
empty slot, with a random flip. It then moves
the disk back to its original storage slot with
its original orientation. This test displays
"FAIL" if there are no disks in the jukebox or
if all storage slots are full. The drives and
mailslot must be empty.
Makes a combination of moves with a PASS/
DRIVE IO
FAIL result. It moves an optical disk from a
randomly-chosen full slot to a randomly-
chosen drive, with a random flip. It then
moves the cartridge back to its original slot
with its original orientation. This test
displays if there are no disks in the jukebox
or if all storage slots are full. The drives and
mailslot must be empty.
Autochanger Error Codes
Jukebox Micro-Move Error Codes
B-41