Run-Time Log Data Format
This table can be accessed via the Log Sense Command (4DH), Table 3-
45 on page 3-47 with page code 38H. It keeps a record of error recovery
activity. An entry is added to the Run-Time Log when a move fails or
when any type of error recovery is required. Only the last ten entries are
saved.
Table 3-61
Run-Time Logs Data Format (For all models, EXCEPT 40fx, 80ex,
125ex and 220mx)
Byte
Table 3-62
Run-Time Logs Data Format (For the 40fx, 80ex, 125ex and 220mx
models ONLY)
Chapter 3
Description
0
Page Code 38H
1
Reserved = 0
2
Number of bytes to follow (MSByte)
3
Number of bytes to follow (LSByte)
4
Current Entry
5
Number of Entries
6-366
Array of 10 log entries (36 Bytes each)
Byte
0
Page Code 38H
1
Reserved = 0
2-3
Number of bytes to follow
4-7
Number of Macro-Move IDs since this log was reset
8-9
Number of retries done since this log was reset
10-11
Number of inline recoveries since this log was reset
12-13
Number of fatal errors since this log was reset
14
Number of entries in this log
Jukebox SCSI-2 Command Set
Log Sense Command (4DH)
Description
3-59