HP 2600fx - Optical Disk Drive Command Reference Manual page 283

Table A-6
Drive Error Codes
DSP Error Codes
DSP Error Codes
Code Description
(hex.)
56 Illegal target zone (SEEK landing)
57 Illegal next zone (SEEK landing)
58 Illegal zone (ID search)
59 Illegal zone (ID search)
5A Illegal zone (focus search)
5B Kick inner area failed
5C Servo agc time out
61 Focus on failed
Focus on aborted
62
63 Tracking on failed
64 Tracking drive saturation
65 No ID (No SM or CRC=NG) (DON start)
66 No ID (No SM or CRC=NG) (SEEK start)
67 No ID (No SM or CRC=NG) (SEEK landing)
68 Seek slip too much
69 Voice Coil Motor and Multi-Track Jump Seek time out
6A Seek target is too far for a One Track Jump
6B Multi-Track Jump is too long
6C Focus failure
6D Tracking failure
6E Low Pull-in
6F Focus drive saturation
71 Cannot detect PEP signal
A-20 Appendix A